Margin Top/Bottom - Dell E525w User Manual

1 Load the document(s) face up into the ADF with the top edge of the document(s) in first.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 191 or "Making Copies From
the Document Glass" on page 189.
2 Press the (Copy) button.
3 Press the button until Preferences is highlighted, and then press the
4 Press the button until Multiple-Up is highlighted, and then press the
5 Press the button to select the desired setting, and then press the
NOTE:
Values marked by an asterisk (
Off*
Auto
Manual
6 Customize the copy settings including the number of copies, copy size, contrast, and image quality. For more
information, see "Setting Copy Options" on page 191.
7 Ensure that Start Copy is highlighted, and then press the
When you are using the document glass and Multiple-Up is set to Auto, or Manual, the display prompts you
for another page. Press the
If you select Yes, press the

Margin Top/Bottom

To specify the top and bottom margins of the copy:
1 Load the document(s) face up into the ADF with the top edge of the document(s) in first.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 191 or "Making Copies From
the Document Glass" on page 189.
2 Press the (Copy) button.
3 Press the
button until Preferences is highlighted, and then press the
4 Press the button until Margin Top/Bottom is highlighted, and then press the
5 Press the or button or enter the desired value using the numeric keypad, and then press the
button.
NOTE:
Values marked by an asterisk (
4 mm*/0.2 inch*
Available Range:
0-50 mm/0.0-2.0 inch
*
) are the factory default menu settings.
Does not perform multiple-up printing.
Automatically reduces the size of original images to fit onto one sheet of paper.
Prints the original size of original images onto the one sheet of paper in the size specified in
Reduce/Enlarge .
button to select Yes or No, and then press the
button to select Continue or Cancel, and then press the
*
) are the factory default menu settings.
Specify the value in increments of 1 mm/0.1 inch.
(Set) button.
(Set) button.
(Set) button.
(Start) button to start copying.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set)
197
Copying