Dell E525w User Manual page 86

Panel Alert Tone
Job Tone
Alert Tone
Out of Paper Tone
Auto Clear Alert Tone
All Tones
Job Time-Out
Panel Language
Disable printing with larger
*2
paper size
Auto Log Print
*3
mm/inch
*1 Enter 5 in Power Saver Timer - Sleep to put the printer in the power saver timer mode 5 minutes after it finishes a job. This uses less
energy, but requires more warm-up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and you
notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum
warm-up time. Select a value between 5 and 30 minutes for the power saver timer mode if you want a balance between energy
consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver timer mode when it receives data from the computer. You
can also return the printer to the standby mode by pressing any button on the operator panel.
*2 Available only in the Dell Printer Configuration Web Tool and the Tool Box.
*3 The default varies depending on country-specific factory default.
USB Settings
Purpose:
To change USB settings on your printer.
Values:
Port Status
PS Data Format
PCL Settings
Purpose:
To change the PCL settings.
Values:
Paper Size
Orientation
Font
Symbol Set
Font Size
Font Pitch
Form Line
Quantity
86
Dell™ Printer Configuration Web Tool
Sets the volume of the tone that is emitted when the operator panel input is incorrect, or disables
the tone.
Sets the volume of the tone that is emitted when a job is complete, or disables the tone.
Sets the volume of the tone that is emitted when a problem occurs, or disables the tone.
Sets the volume of the tone that is emitted when the printer runs out of paper, or disables the
tone.
Sets the volume of the tone that is emitted 5 seconds before the printer performs auto clear, or
disables the tone.
Sets the volume of all the alert tones, or disables all the tones.
Specifies the amount of time that the printer waits for data to arrive from the computer. The print
job is canceled if it times out.
Used to set the language on the operator panel.
Specifies whether to print jobs if the paper set in the tray of the printer is larger than the paper
size set in the printer driver (the paper size does not have to match).
Specifies if a job history needs to be printed after every 20 jobs.
Specifies the measurement unit displayed after the numeric value on the operator panel.
Enables the USB interface on your printer.
Sets PostScript 3 Compatible communication protocol for each interface.
Sets the paper size.
Sets how text and graphics are oriented on the page.
Sets the font from the list of registered fonts.
Sets a symbol set for the specified font.
Sets the font size for scalable typographic fonts.
Sets the font pitch for scalable mono spaced fonts.
Sets the number of lines in a page.
Sets the number of copies to print.