Dell E525w User Manual page 102

WSD
SNMP
Purpose:
To configure the detailed settings of SNMP.
Values:
SNMP Configuration
SNMP v1/v2c
Purpose:
To edit the detailed settings of SNMP v1/v2 protocol.
To enter this page, click Edit SNMP v1/v2 Properties in the SNMP page.
Values:
Community Name
102
Dell™ Printer Configuration Web Tool
Port Number
Receive Time-Out
Notification Delivery Time-
Out
Maximum Number of TTL
Maximum Number of
Notification
Enable SNMP v1/v2c
Protocols
Edit SNMP v1/v2c
Properties
Enable SNMP v3 Protocols Select the check box to enable the SNMP v3 protocol.
Edit SNMP v3 Properties
Community Name (Read
only)
Re-enter Community Name
(Read only)
Community Name
(Read/Write)
Re-enter Community Name
(Read/Write)
Sets the port number. This must be 80 or between 8000 and 9999.
Sets the receive time-out period from 1 to 65535 seconds.
Sets the notification time-out period from 1 to 60 seconds.
Sets the maximum number of TTL from 1 to 10.
Sets the maximum number of notifications from 10 to 20.
Select the check box to enable the SNMP v1/v2c protocol.
Click to display the SNMP v1/v2c page and to edit the setting of
SNMP v1/v2c protocol from the page.
Click to display the SNMP v3 page and to edit the setting of SNMP
v3 protocol from the page.
You can click this item only when SSL communication is enabled.
Sets the community name to access (read only) data using up to 31
alphanumeric characters.
The original setting will remain valid if no input is made.
Characters entered for community name in the previous settings
will not be displayed on the screen. The default Read Community
is public.
Enters the community name to access (read only) data again to
confirm it.
Sets the community name to access (read and write) data using up
to 31 alphanumeric characters.
The original setting will remain valid if no input is made.
Characters entered for community name in the previous settings
will not be displayed on the screen. The default Read/Write
Community is private.
Enters the community name to access (read and write) data again
to confirm it.