Software Download
Purpose:
To enable or disable download of firmware updates.
Values:
Disable
Disables firmware updates.
*
Enable
Enables firmware updates.
Display Network Information
Purpose:
To show or hide network information in the message field of the top menu screen.
Values:
Show IPv4 Address*
Show Host Name
Hide Network Information
Scan to E-mail
Use this menu to edit the transmission source.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Edit From Field
Purpose:
To specify whether to enable editing of the transmission source when you use Scan to E-mail.
Values:
Disable
Disables editing of the transmission source.
Enable*
Enables editing of the transmission source.
USB Settings
Use this menu to change USB interface settings.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
USB port
Purpose:
To enable or disable the USB interface. The change takes effect after the printer is turned off and then on.
Values:
Disable
Disables the USB interface.
Enable*
Enables the USB interface.
Shows the IPv4 address of the printer.
Shows the host name of the printer.
Does not show network information.
Understanding the Printer Menus
159