Protrudent / Bumpy Paper - Dell C1660w Color Laser Print User Manual

Action
2
Clean the CTD sensor.
Clean the CTD sensor. See "Cleaning the Color Toner Density
a
(CTD) Sensor" on page 195.
Launch the Tool Box, and click Color Registration Adjustment on
b
the Printer Maintenance tab.
Clear the On check box for Auto Registration Adjustment.
c
Click Start next to Auto Correct.
d
Is the problem recovered?
3 Print the Color Registration Chart and manually correct the color
registration.
Click Color Registration Adjustment on the Printer Maintenance
a
tab.
Clear the On check box for Auto Registration Adjustment.
b
Click Start next to Print Color Regi Chart.
c
The color registration chart is printed.
Select the value with the straight line. See "Adjusting Color
d
Registration" on page 196 for details.
Click Apply New Settings.
e
Click Start next to Print Color Regi Chart to print the Color
f
Registration Chart again.
Adjust the values for every color until the lines at 0 are the straightest.
g
Is the problem recovered?

Protrudent / Bumpy paper

Action
1 Clean up the fusing unit.
Load one sheet of paper on the MPF, and then print a solid image all
a
over paper.
Load the printed sheet with the side to be printed on facing down,
b
and then print a blank sheet of paper.
Is the problem recovered?
Yes No
The task is complete. Go to action 3.
The task is complete. Contact Dell.
Yes No
The task is complete. Contact Dell.
Troubleshooting
221