Inserting And Changing The Battery; Connecting The Antenna; Connecting The Microphone/Line Cable - Sennheiser Tourguide UHF Instructions For Use Manual

Inserting and changing the battery

Slide the cover of the battery compartment
the embossed arrow until it clicks audibly.
Open the cover.
Insert the 9 V PP3 alkaline battery (IEC 6 LR 61). Please observe
correct polarity when inserting the battery.
Close the battery compartment.
To remove the battery, push the small red lever
compartment towards the bottom side of the transmitter.
Note:
We recommend powering the transmitter by a standard PP3
alkaline battery. If powered by a rechargeable 9 V battery, the
operating time will be drastically reduced.

Connecting the antenna

Screw the antenna

Connecting the microphone/line cable

Electret powering ("plug-in" power) is available at the AF input for
powering the microphone.
Connect the 3.5 mm jack plug
to the AF input (MIC/LINE)
Lock the jack plug by screwing down the locking ring
onto the antenna socket (M3 connection).
from the microphone/line cable
.
in the direction of
in the battery
.
19