Installing The Oil Filter; Filling Up With Engine Oil - KTM 2009 690 Rally Factory Replica Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Installing the oil filter

x
8.87

Filling up with engine oil

8.88
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Insert the oil filter
–
Oil the O-ring of the oil filter cover and mount it with the oil filter cover
600089-10
–
Mount and tighten screws
Guideline
Screw, oil filter cover
–
Connect the plug
600086-10
–
Insert the oil filter
–
Oil the O-ring of the oil filter cover and mount it with the oil filter cover
600085-10
–
Mount and tighten screws
Guideline
Screw, oil filter cover
–
Install the fuel tank. (
600083-11
x
–
Remove the screw cap
Engine oil
–
Mount and tighten screw cap
Danger
Danger of poisoning Exhaust gases are poisonous and can result in uncon-
sciousness and/or death.
600060-11
–
–
Start the engine and check that it is oil-tight.
.

.

.

.

.

p. 56)
on the clutch cover and fill up with engine oil.

2.20 l (2.32 qt.)
.

When running the engine, always make sure there is sufficient venti-
lation, and do not start or run the engine in a closed space without an
effective exhaust extraction system.
M5 6 Nm (4.4 lbf ft)
M5 6 Nm (4.4 lbf ft)
Engine oil (SAE 10W/60)
(00062010035) ( p. 96)
Engine oil (SAE 20W/60) (
70
.

.

p. 96)