Table of Contents
Advertisement
MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing front brake linings
8.41
Warning
Danger of accidents Improper brake maintenance and repair.
–
Always have your brake system maintained and repaired in an authorized KTM workshop.
Installing the front brake linings
8.42
Warning
Danger of accidents Reduced braking due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents Reduced braking due to use of non-approved brake linings.
–
Brake linings available from accessory suppliers are often not tested and approved for use on KTM vehicles. The construc-
tion and friction factor of the brake linings and therefore the brake power can differ considerably from the original KTM
brake linings. If brake linings are used that differ from the originals, there is no guarantee that they comply with the origi-
nal license. The vehicle no longer corresponds to the condition at delivery, and the warranty is no longer valid.
–
Check the brake linings for minimum thickness
Info
The brake lining wear marks
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the front brake linings.
600062-10
x
–
Press the brake caliper by hand on to the brake disc in order to press back the
brake pistons.
Info
Make sure when pushing back the brake pistons that you do not press the
brake caliper against the spokes.
–
Remove the lock pin
600039-10
–
Remove the bolt
–
Remove screws
–
Clean brake caliper and brake caliper support.
600040-10
x
–
Check the brake discs. (
–
Check that leaf spring
caliper support are seated correctly.
Info
The arrow on the leaf spring points in the rotation direction of the brake
disc.
600041-10
must be clearly visible.
≥ 1 mm (≥ 0.04 in)
(
x
.
with a suitable tool and disassemble the brake linings
and take off brake caliper.
p. 42)
in the brake caliper and sliding plate
.
p. 46)
in the brake
45
.
Hide quick links:
Advertisement
Table of Contents
