Factory Five Racing Mk4 Roadster Assembly Manual page 75

Jack the rear axle up so the rod end of the shocks can be mounted on the axle through the shock mount
hole.
Install the kit ½"x 4" bolts are provided for each lower shock mount. From the rear, the bolt goes
through the bracket, ⅛" shim, shock, then the long spacer (1.09") followed by the bracket and axle. Use
a ¾" socket and Torque wrench to tighten both upper and lower mounts to 40 ft-lbs.
74
www.factoryfive.com 508-291-3443