Factory Five Racing Mk4 Roadster Assembly Manual page 218

Mark the hole locations for the oil filter relocator on the old AC bracket or on the front frame X member
(preferred location). If you're going to mount the relocate bracket on the X member.
Drill the mounting holes for the relocator.
Make sure to drill this before you install your engine. Otherwise, your drill won't fit in between
the engine and the frame.
Hook the oil lines up to the Oil filter Relocator and the adapter on the engine. Make sure that the lines
go to the correct ports or the engine will be starved for oil. The out on the engine goes to the in on the
Relocator and the out on the Relocator goes to the in on the engine.
217
www.factoryfive.com 508-291-3443