Factory Five Racing Mk4 Roadster Assembly Manual page 186

Which side you run down may depend on where you are hooking up to your fuel rail, carburetor,
or pressure regulator. We usually run the fuel lines on the passenger side of the car and the brake
lines on the driver side of the car.
The laser cut stainless brackets from the front brake assembly attach to the chassis right behind the front
upper control arms. Drill and rivet these in place using two
Push the brake line adapters through the brackets from the outside in and install the clips that hold them
in place.
185
www.factoryfive.com 508-291-3443
/ " rivets.
3
16