Basic Playback Operations - Sony SVO-5800 Operating Instructions Manual

Playback
This section describes the basic operating procedures for playback, using the front
panel of the unit.
Basic Playback Operations
Basic playback operations
1 Set the POWER switch to ON.
2 Set the REMOTE/LOCAL switch to LOCAL.
It enables you to operate the unit using the controls on the front panel.
3 Insert a cassette into the cassette compartment.
4 Use the MONITOR OUT selectors (METER switch and CH-1/MIX/CH-2
selector) to select the sound to be monitored during playback.
The selected sound is output from the HEADPHONES connector and the
MONITOR AUDIO connector on the rear panel.
When the selector is set to the MIX position, stereo sound is output through the
HEADPHONES connector, and the mixed sound of channel 1 and channel 2
through the MONITOR AUDIO connector.
CH-1/MIX/CH-2
solectraeting
Normal recording
sound
(continued)
Playback
Playback
15(E)