Table of Contents
Advertisement
Weekly:
Boil burners in a solution of washing soda. Rinse and dry parts thoroughly. Flash rusting may occur.
This is a normal condition and will not affect performance or the product.
When reinstalling the burner back onto the range, be sure the burner heads are properly connected.
Do not light the pilot or turn burner valve ON with the burner head removed.
WARNING: THE RANGE AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING,
CLEANING OR SERVICING THE RANGE.
VENT
When cool, check the flue vent every six months for obstructions.
SERVICE AND PARTS INFORMATION
To obtain service and parts information concerning this modular range, contact the Vulcan-Hart
Service Agency in your area (refer to listing supplied with the modular range), or Vulcan-Hart Service
Department at the address or phone number shown on the front cover of this manual.
OPTIONAL FIELD INSTALLABLE ACCESSORIES
DESCRIPTION
Flue Devices
Flex Hose
and Quick
Disconnects
FORM 35607 (06-03)
MAINTENANCE
1. Stainless steel backsplash.
2. Stainless steel 11" (28 cm) low riser.
3. Stainless steel 4" (10 cm) low riser (use with open tops only).
1.
/
" (1.9 cm) flex hose/disconnect – 3 ft. (0.9 m) long.
3
4
2.
/
" (1.9 cm) flex hose/disconnect – 4 ft. (1.2 m) long.
3
4
3.
/
" (1.9 cm) flex hose/disconnect – 5 ft. (1.5 m) long.
3
4
OPTIONS
– 10 –
PRINTED IN U.S.A.
Advertisement
Table of Contents
