Maintenance; Pilot Lights; Service And Parts Information - Vulcan-Hart COMMANDER SERIES Operation Manual

MAINTENANCE

WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES.

PILOT LIGHTS

Pilot lights are to be adjusted at the proper ame height.
LUBRICATION
All moving parts must be checked for wear and lubricated. Contact your local authorized servicer.
All valves and controls should be lubricated by your local authorized servicer, using a high-temperature
grease.
Motors in these convection ovens are permanently lubricated and require no additional maintenance.

SERVICE AND PARTS INFORMATION

To obtain service and parts information concerning this model, contact the Authorized Service Agency
in your area (refer to the manufacturer's website for a complete listing of Authorized Service and Parts
depots) or contact 1-800-814-2028 for Technical service and parts assistance.
When calling for service, the following information must be available: model number, serial number,
manufacture date (MD) and voltage.
— 15 —