8.
MEMORY CARD OPERATIONS
This system uses SD and SDHC cards to store points, routes, tracks, settings, and
screenshots. The system accepts cards of up to 32 GB in size.
Note: Stop the vessel before reading or writing data to an SD card.
8.1
The Memory Card Screen
You can open the [Memory Card] screen from [Home].
1. Open [Home] and tap the [General] menu icon.
2. Tap [Memory Card] to show the [Memory Card] screen.
8.2
How to Initialize SD Cards
Before you can use an SD card, the card must be initialized for use with the system.
You can initialize cards that contain data, in which case all information on the card is
erased.
1. Open the SD card cover and insert a blank SD card in the SD card slot. Close the
cover.
2. Open [Home] and tap the [General] menu icon.
3. Tap [Memory Card] to show the [Memory Card] screen.
4. Tap [Initialize] (at the bottom of the screen). If the card is not a storage card the
message "It is not a user card." appears.
When the initialization is completed, the message "Initializing is Completed." ap-
pears. Do not remove the card until the initialization is completed.
8-1