Mitel 6867i User Manual page 217

To Answer a Filtered Call
Use the following procedure to answer a filtered call:
IP PHONE UI
1. Lift the handset, press the
no active call
or
Press the Answer softkey if on an active call.
To Ignore a Filtered Call
Use the following procedure to ignore a filtered call:
IP PHONE UI
1. Press the button or Ignore softkey if the phone has no active calls
or
Press the Ignore softkey if on an active call.
To Push a Filtered Call Back to the Executive
Use the following procedure to push a filtered call back to the Executive:
IP PHONE UI
1. After answering a filtered call, press the Push softkey.
The phone will enter in the FAC for the BroadSoft Executive-Assistant Call Push feature
and automatically dial the FAC call.
The FAC call will be answered and the filtered call will be released if the push is successful.
Note: If the push is unsuccessful, press the Pickup softkey to retrieve the filtered
call.
To Perform a Blind Transfer of a Filtered Call to the Executive
Use the following procedure to perform a blind transfer of a filtered call to the Executive:
IP PHONE UI
1. After answering a filtered call, press the Xfer softkey.
2. Enter the Executive's phone or extension number and press the Xfer softkey.
The phone will recognize the Executive's number and will change the transfer scenario
into an Executive-Assistant Call Push scenario (i.e. the phone will enter in the FAC for the
button, or press the Answer softkey if the phone has
Additional Features
215