Set Date And Time - Mitel 6867i User Manual

Mitel 6867i SIP Phone Release 4.0.0 SP1 User Guide
5. Use the 5 and 2 keys to scroll through and choose the time zone that applies to your area.
The default time zone is US-Eastern.
Note: For a list of the time zone values available on the IP phone, see
Time Zone Codes."
6. Press the Save softkey to save your changes.

SET DATE AND TIME

Configuring the Date and Time Using the IP Phone UI
With a valid time server enabled your IP phone will synchronize the time displayed with the
specified configuration server. The phone will use the time from Time Server 1 unless it is not
configured or unavailable, in which case it will move on to Time Server 2, and if necessary Time
Server 3.
IP PHONE UI
1. Press
2. Navigate to the Time and Date > Set Date and Time option and press the
Select softkey.
3. If you want to synchronize the time and date using a time server, ensure there is a check-
mark in the box corresponding to the Use Network Time setting. If there is no checkmark,
press the
a. Press the 2 key to highlight Time Server 1, Time Server 2, or Time Server 3.
b. Using the keys on the dialpad, enter an IP address or domain name for the time server.
Use the Backspace key to move back a space and delete a character. Use the Dot
softkey to enter dots within the IP address or domain name. Use the 123 4 softkey to
toggle between entering numbers and entering letters.
48
on the phone to enter the Options List.
button to enable the Use Network Time setting.
"Appendix A -
button or