Connecting The Telephone To The Pabx; Settings On The Base; Changing The Dialling Mode; Setting Recall - Gigaset C810 Manual

Gigaset C810/810 A / CHN en/ A31008-M2327-Y101-1-7619 / Pabx_BS+HS.fm / 15.09.2011

Settings on the base

Connecting the telephone to the PABX

The following settings are only necessary if
your PABX requires them; see the PABX user
guide. The settings can be made via the base
or via a registered handset (
Settings on the base

Changing the dialling mode

The following dialling modes can be
selected:
u
Tone dialling (DTMF, default)
u
Pulse dialling (DP)
To change the dialling mode:
¢
§§Menu§§
¢
Features
q

Setting recall

Recall specifies the flash time (break) used
for tone dialling when a recall (e.g. a consul-
tation call) is activated. Your phone is preset
at the factory for operation on the main con-
nection. For operation on a PABX, you may
have to change this value. Please refer to the
user guide for your PABX.
¢
§§Menu§§
¢
Features
q

Setting an automatic prefix

You can set a prefix which is automatically
added to a phone number with at least 5
digits. This prefix can be used to dial into the
outside line when operating the device on a
56
¢
page 57).
¢
System Settings Additional
Dialing Mode
Select Tone or Pulse and press
§§Ok§§
.
¢
System Settings Additional
Recall
Select the required flash time
§Ok§
and press .
Possible values are:
80 ms, 100 ms, 120 ms, 180 ms,
250 ms, 300 ms, 600 ms, 800 ms.
PABX. A pause is added automatically after
the prefix.
The number must be dialled in idle mode, i.e.
then P.
~
first
Activating/deactivating the
automatic prefix
¢
§§Menu§§
System Settings
¢
Activation
q
Select Auto Prefix On or Auto
Prefix Off and press
Setting the prefix number
¢
§§Menu§§
System Settings
¢
Prefix No.
~
Enter the prefix number and
§Ok§
press .
Example: Auto Prefix On and set to 65
You dial Really dialled number
1234 1234
12345 65P12345
#12345 65P#12345
Temporarily switching to
tone dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need tone dialling for a con-
nection (e.g. to listen to a network mail box)
you must switch to tone dialling for the call.
Precondition: You are conducting a call or
have already dialled an external number.
During the call:
*
Press the star key.
After the call is ended, dial pulsing is auto-
matically activated again.
¢
Auto Prefix
§Ok§
.
¢
Auto Prefix