Installation
7. Device Direct (DD) Communications:
Each device will need to be communicating to Xerox through the internet via the Xerox Device Direct method for Remote
Diagnostics support. Follow the steps below (customer) to find how to setup Device Direct, if required.
Setting up Device Direct:
A) Go to the "Support and Drivers" link on Xerox.com.
Search for your product, then click on the Support link for that product.
−
In the search field, enter "Enroll SMart eSolutions" and follow the instructions provided.
−
B) If the search does not return any instructions:
Click on the Documentation link for your product.
−
Open the System Administrators Guide and refer to the section of the guide which provides information regarding
−
Smart eSolutions Setup and follow the steps provided.
Installation Planning
Main Components
The WorkCentre 5945/5955 is delivered with Print Engine, Scanner and Embedded Network Controller
Module Dimensions
Configuration
Base Configuration with
Center Offset Tray
Base Configuration With
Office Finisher
Base Configuration with
Office Finisher + (Booklet
Maker)
Customer Expectation and Installation Guide
Dimensions and Weights
Width
Depth
33.5 in / 850 mm
26.2 in / 665
mm
57.9in / 1470 mm
26.2 in / 665
mm
60.2 in / 1,530
26.2 in / 665
mm
mm
Height
Weight
45.3 in / 1,150
249 lbs / 113
mm
kg
45.3 in / 1,150
314.5 lbs /
mm
142.5 kg
45.3 in / 1,150
349.5 lbs /
mm
158.5 kg
®
WorkCentre
5900 Series
X
X
X
17