Table of Contents
Advertisement
Installation
Electrical Requirements
Ground Fault Protection is provided which meets Xerox internal safety requirements and exceeds the Industry Standards for Information Technology
Equipment. A single power cord (see above) is required for the WorkCentre 5900 series
5945/5955
Geographies: Western Hemisphere
Line Option
Sole Use (not required but recommended)
Voltage
110 -127 VAC
Amperage
15 A
Frequency
50/60 Hz, Single Phase
Power Cord
8.5 feet
Length
Receptacle
NEMA part #: 5-15R
Geographies: Eastern Hemisphere
Line Option
Sole Use (not required but recommended)
Voltage
220 – 240 VAC
Amperage
10 A
Frequency
50/60 Hz, Single Phase
Power Cord
2.6 meters
Length
Receptacle
Requires use of a 10 ampere outlet which is
standard in most modern office buildings.
Consult with local service to determine the
country specific receptacle and confirm the
existence of this outlet in the proposed
installation space.
Space Requirements/ Service Space Envelope
The dimensions shown below provide the overall service space required, including the space to the nearest obstruction. The dimensions reflect both
typical and hallway installations and are absolute minimums.
Machine
Configuration
Width (A)
mm/inches
Basic machine
850 / 33.5
without finisher
Basic machine
with Office
1470 / 57.9
Finisher
Basic machine
with Office
1530 / 60.2
Finisher and
Booklet Maker
Customer Expectation and Installation Guide
Install Width Required (C)
Machine
mm/inches
depth (B)
mm/inches
Moveable
665 / 26.2
2043 / 80.4 3043 / 119.8
665 / 26.2
2663 / 104.8 3663 / 144.2
665 / 26.2
2723 / 107.2 3723 / 146.6
F
D (Fixed)
D
Install Depth Required (D)
mm/inches
Fixed
Moveable
1665 / 65.5
2665 / 105
1665 / 65.5
2665 / 105
1665 / 65.5
2665 / 105
C (Fixed)
C
880
mm
A
WorkCentre
Service Work Space (E)
mm/inches
Fixed
Moveable
100 / 4
1000 / 39.4
100 / 4
1000 / 39.4
100 / 4
1000 / 39.4
E (Fixed)
B
®
5900 Series
Left Door Access
Space (F)
mm/inches
Fixed
440 / 17
440 / 17
440 / 17
E
18
Advertisement
Table of Contents
