Specifying The Ipp Settings - Konica Minolta bizhub 751 User Manual

Installation on Macintosh computers
Adding a printer
1
On the "Apple" menu, select "System Preferences".
2
Click the "Print & Fax" icon.
3
Click [+] in the Print & Fax window.
– If available printers have already been set up, the Add Printer dialog box does not appear.
4
Click the [IP] button or the [IP Printer] button.
5
From "Protocol", select "LPD".
6
In "Address", enter the IP address of this machine.
– After the printer driver is selected automatically, go to Step 8.
– If an incorrect printer driver is selected, go to Step 7.
7
Select the desired printer driver manually.
– When OS X 10.4 is used, select "KONICA MINOLTA" in "Print Using", and then select the printer
driver of the desired model name from the list.
– When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then select
the printer driver of the desired model name from the list.
– When OS X 10.6 is used, select "Select printer software" from the "Print Using", and then select the
printer driver of the desired model name from the list that is displayed in another window.
– In case of OS X 10.5/10.6, you can find the driver easily by inputting "KONICA MINOLTA" in the text
box for search.
8
Click the [Add] button.
If the selected printer is registered in the "Print & Fax" list, the setting procedure is completed.
Note
If the Installable Options window appears, proceed to change the option settings as necessary. For
details, refer to "Initializing the printer driver" on page 9-4.
For OS X 10.4, you can also add a printer by clicking [Add] in the Printer Setup Utility window.

Specifying the IPP settings

Specifying the TCP/IP setting for this machine
Specify the IP address of this machine.
!
Detail
For details on the IPP settings of this machine, refer to the User manual – Network Administrator.
IPP setting for this machine
Enable IPP print in the IPP Setting screen of this machine.
!
Detail
For details on the IPP settings of this machine, refer to the User manual – Network Administrator.
Specifying the TCP/IP setting for the computer
Specify the TCP/IP setting for the Mac computer connected to this machine.
1
On the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
The Ethernet setting window appears.
– For OS X 10.4, select "Built-in Ethernet", and then click the [Configure] button.
– For OS X 10.5/10.6, select "Ethernet", and then click the [Advanced] button.
IC-208 (Version 2)
5
5-7