Printer Driver Installation By Searching Printers Using The Add Printer Wizard - Konica Minolta bizhub 751 User Manual

Manual installation using the Add Printer wizard

Printer driver installation by searching printers using the Add Printer Wizard

Note
When installing on Windows Vista/7/Server 2008, administrator permissions are required.
Printers will be found during installation. Connect this machine to the network, and then turn on the
power.
1
Insert the Driver DVD into the DVD drive of the computer.
2
Click the [Start] button, and then click "Control Panel".
3
Select the desired printer function in "Hardware and Sound".
– In Windows Vista/Server 2008, click "Printers" in "Hardware and Sound". If Control Panel is
displayed in Classic View, double-click "Printers".
– In Windows 7/Server 2008 R2, select "View devices and printers" from "Hardware and Sound".
When Control Panel is displayed in Icon View, double-click "Devices and Printers".
4
Click "Add a printer" from the toolbar.
The Add Printer window appears.
5
Click "Add a network, wireless or Bluetooth printer".
– If the printer is not detected, turn off this machine, then on again.
– When turning off the power, then on again, wait at least 10 seconds before turning it on again.
Otherwise, this machine may not function properly.
The connected printers are detected.
6
Select this machine from the list, and then click the [Next] button.
– When using the LPR/Port9100 protocol, select the printer having its IP address.
– When using an SMB connection, select the printer having its "\\NetBIOS name\print service name".
– When using the SMB connection, click [Next], and then click [OK] in the "Connect to Printer"
window that appears.
– It may take some time to finish searching the entire list of printers.
7
Click the [Have Disk] button.
8
Click the [Browse] button.
9
Specify the desired folder on the DVD that contains the printer driver, and then click the [Open] button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
Printer drivers that can be selected: PCL driver, PS driver, XPS driver, fax driver
– For details on fax drivers, refer to the User manual – Fax Driver Operations.
10
Click the [OK] button.
The "Printer" list appears.
11
Click the [Next] button.
– When using the SMB connection, click [OK].
12
Follow the on-screen instructions.
– If the "User Account Control" window appears, click the [Continue] or [Yes] button.
– If the Verify the publisher dialog box of Windows Security appears, click "Install this driver software
anyway".
13
Click the [Finish] button.
14
When the installation is completed, make sure that the icon of the installed printer appears in the
Printers window.
IC-208 (Version 2)
4
4-11