Printer Driver Installation By Creating A Port Using The Add Printer Wizard - Konica Minolta bizhub 751 User Manual

4
15
Remove the DVD from the DVD drive.
This completes the printer driver installation.

Printer driver installation by creating a port using the Add Printer Wizard

Reminder
When installing on Windows Vista/7/Server 2008, administrator permissions are required.
Printers will be found during installation. Connect this machine to the network, and then turn on the
power.
1
Insert the Driver DVD into the DVD drive of the computer.
2
Click the [Start] button, and then click "Control Panel".
3
Select the desired printer function in "Hardware and Sound".
– In Windows Vista/Server 2008, click "Printers" in "Hardware and Sound". If Control Panel is
displayed in Classic View, double-click "Printers".
– In Windows 7/Server 2008 R2, select "View devices and printers" from "Hardware and Sound".
When Control Panel is displayed in Icon View, double-click "Devices and Printers".
4
Click "Add a printer" from the toolbar.
The Add Printer window appears.
5
Click "Add a local printer".
The Select a Printer Port dialog box appears.
6
Click "Create a new port", and select the port type.
– When using an LPR/Port9100 connection, select "Standard TCP/IP Port".
– When using an SMB connection, select "Local Port".
7
Click the [Next] button.
8
Specify the IP address and port.
– When using an LPR/Port9100 connection, select "TCP/IP Device", and then enter the IP address.
– When using an SMB connection, enter "\\NetBIOS name\print service name" in the "Enter a port
name" box.
– When both LPR and Port9100 are enabled for this machine, the printer driver and the machine is
connected with LPR.
– Enter the same NetBIOS name and print service name those appear in "Print Setting" in the SMB
Setting screen of this machine.
9
Click the [Next] button.
– If the Additional Port Information Required dialog box appears, go to step 10.
– If the Install the printer driver dialog box appears, go to step 13.
10
Select "Custom", and then click the [Settings] button.
11
Change the settings according to the port, and then click the [OK] button.
– For an LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
– For a Port9100 connection, select "RAW", and then enter the RAW port number (9100 at default) in
the "Port Number" box.
– The information entered here is case-sensitive.
12
Click the [Next] button.
The Install the printer driver dialog box appears.
13
Click the [Have Disk] button.
14
Click the [Browse] button.
4-12
Manual installation using the Add Printer wizard
IC-208 (Version 2)