[Calibration] - Oki C931 User Manual

Table of setting items in the device setup screen

[Calibration]

1
Auto Density Mode
Auto BG Adjust Mode
2
*1: Displayed if [Auto Density Mode] in the control
panel is set to [ON].
Adjust Density
3
Adjust Registration
Heavy Media Adjust
4
5
Heavy Media Mode
Color Density Cyan Density
Magenta Density
Yellow Density
Black Density
White Density
*2: Displayed when using white
Clear Density
*3: Displayed when using clear
Item
*1
*2
toner in C941/ES9541dn.
*3
toner in C941/ES9541dn.
On Sets whether to automatically compensate density
Off and shade.
Off Compensates for print results variation due to
-1 differences in the temperature and humidity
0 environments, print density, and print frequency.
+1 Changes the value if there is burr in the image or
+2 the underlay is dark.
Execute Implements density compensation. Implement
when the device is in standby mode.
Execute Implements auto color misalignment compensation operations.
Implement when the device is in standby mode.
Off Compensates the fixing speed during card stock
-5 printing.
-4
-3
-2
-1
0
+1
+2
+3
+4
+5
Auto Sets the card stock mode. Suppresses misalignment of
On the image training edge during card stock printing.
Off Enabled for ultra card stock 4 and ultra card stock 5.
-3 Adjusts the cyan density.
to This setting is enabled from printing after the
0 density compensation has been implemented.
to
+3
-3 Adjusts the magenta density.
to This setting is enabled from printing after the
0 density compensation has been implemented.
to
+3
-3 Adjusts the yellow density.
to This setting is enabled from printing after the
0 density compensation has been implemented.
to
+3
-3 Adjusts the black density.
to This setting is enabled from printing after the
0 density compensation has been implemented.
to
+3
-3 Adjusts the white density.
to This setting is enabled from printing after the
0 density compensation has been implemented.
to
+3
-3 Adjusts the clear density.
to This setting is enabled from printing after the
0 density compensation has been implemented.
to
+3
- 318 -
z Shaded areas are factory-set values.
Details