Using Dhcp; Setting The Dhcp Server - Oki C931 User Manual

Using DHCP

Using DHCP

z
The IP address can be acquired from the DHCP server.
1
Note
z PC administrator privileges are required for the setup.
z Incorrectly allocating the IP address may cause major malfunctions such as crashing the network. Thoroughly consult the
network administrator before making the settings.
2

Setting the DHCP server

DHCP is the protocol that allocates IP addresses
automatically to each TCP/IP network. You can
3
set a subnet mask in addition to the IP address.
Note
z Set the DHCP server so that a fixed IP address is allocated
to the device. Allocating IP addresses randomly may
4
disable printing via the network. See the DHCP server
manuals for how to allocate fixed IP addresses.
Memo
z Compatible with the following OS.
– Windows Server 2012 R2/Windows Server 2012/Windows
5
Server 2008 R2/Windows Server 2008/Windows Server 2003
z The following procedure uses Windows Server 2008 R2 as
an example. Depending on the OS, descriptions may differ.
1
Click [Start], and select [Admin
tools]>[Server manager].
If [DHCP] is already displayed in [Admin
tools], go to Step 8.
2
Select [Add role] in [Role summary].
3
In the [Add role wizard], click [Next].
4
Enable the [DHCP server] check box,
and click [Next].
5
Make settings as necessary following
the on-screen instructions.
6
Check the settings using the [Check
installation options], and click [Install].
7
When the installation has finished, click
the [Exit] button.
8
Click [Start], and select [Admin
tools]>[DHCP] to start the [DHCP]
wizard.
9
Select the server to be used from the
DHCP list.
10
Select [New scope] from the
[Operations] menu.
11
Use the [New scope wizard] to make
the settings as necessary by following
the on-screen instructions.
Memo
z Make sure to set the default gateway.
z Select [Activate immediately] in the [Activate
scope] screen.
12
Click [Finish].
13
Select the new scope from the DHCP
list, and select [Reserve].
14
Select [New reservation] from the
[Operations] menu.
15
Make the settings.
16
Click [Add].
17
Click [Exit].
18
Select [Finish] from the [File] menu.
- 226 -