Oki C931 User Manual page 313

Hide thumbs Also See for C931:
Table of Contents

Advertisement

„ Panel Setup
Near Life Status
Near Life LED
Idle Display
Panel Brightness During Operating
Panel Brightness While Power Save
Panel Backlight Timer
Front Lamp
„ Time Setup
Date Format
Time Zone
Daylight Saving
Time Setting
Item
Enable
Disable
Enable
Disable
Toner Gauge
Paper Size
5
to
31
0
to
1
to
31
10
to
30
to
300
Mode1
Mode2
Off
Item
yyyy/mm/dd
mm/dd/yyyy
dd/mm/yyyy
-12:00
to
+0:00
to
+13:00
On
Off
2000/01/01 00 :00
to
2009/01/01 00 :00
to
2091/12/31 23 :59
Table of setting items in the device setup screen
Sets the panel display control when a near life
warning occurs for the image drum, fuser unit, or
belt.
Sets the alarm lamp ON control when a near life
warning occurs for the toner, image drum, fuser
unit, belt, or waste toner box.
Sets the information displayed in the standby
screen.
Adjusts the brightness (backlight luminosity) of the
control panel LCD.
The set brightness is applied during control panel
operations.
Adjusts the brightness (backlight luminosity) of the
control panel LCD.
The set brightness is applied after the panel
backlight timer time has eplased from the last
operation.
Adjusts the time (s) from the last operation to
when the panel brightness (during power save) is
applied.
Sets the printer front lamp operations.
Mode1:
Lit when in standby mode, flashes slowly during
processing, and flashes rapidly when an error
occurs.
Mode2:
Lit when in standby mode, flashes slowly during
processing, and OFF when an error occurs.
Off:
Normally OFF.
Sets the date display mode.
Sets the time difference from GMT in 15-minute
units. If the time zone setting is changed, the tome
differences before and after the change is reflected
in the current time.
Memo
z The factory default is set to +9.00.
Sets whether to display summertime.
On:
Advances the current time by 1 hour.
Off:
Turns back the current time by 1 hour.
Sets the time.
Memo
z The factory default is to set the time.
- 313 -
z Shaded areas are factory-set values.
Details
z Shaded areas are factory-set values.
Details
1
2
3
4
5

Advertisement

Table of Contents
loading

Table of Contents