Printing On Various Papers; Printing On Envelopes; Before Setting - Oki C931 User Manual

Printing on various papers

Printing on various papers

z
1

Printing on envelopes

Memo
z For the types of envelopes that can be used, see "Usable
Paper Types" in "Basic".
2
z For the Multi-Purpose Tray preparations, see "Setting
paper in the Multi-Purpose Tray" in "Basic".
z You can print by manually feeding one page at a time from
the Multi-Purpose Tray. For details, see
sheets manually" (P.87).
3
Note
z 2-sided printing and printing from paper trays are disabled
for envelopes.
z Print speed will be slowed.
4
5
z Setting the paper orientation
Set the print surface face-up.
Set as a diagram to print the addressee.
(Yougata 0 gou/2
gou/4 gou
Yougata Long 3 gou)
(Kakugata
2 gou)
"Printing single
(Yougata 0 gou/2
gou/4 gou
Yougata Long 3 gou)
Com-9, Com-10
DL, C4, C5
Monarch

Before setting

1
Check that the envelope is not bent or
swollen.
2
If the envelope is bent, hold the
diagonally-opposite edges of the
envelope and slowly bend to straighten
the envelope.
3
If there is a difference in the thickness
on the left and right when the envelopes
are stacked, use a rod to make the
thickness universal.
z Cross-sectional diagram of an envelope
Memo
z If the front edge of the envelope is bent or
swollen, extend the envelope out flat as shown
in the diagram below.
- 22 -