Oki C931 User Manual page 222

Network setting items
„ MAC address filtering
1
Configuration
Web Page Tool/ Network
Setting Plug-in
MAC address
2
filtering
Notifications
3
from the
following MAC
addresses
MAC address 1
to 50
4
MAC address
of the
registered
administrator
5
„ Encryption (SSL/TLS)
Configuration
Web Page Tool/ Network
Setting Plug-in
HTTP/IPP
HTTP/IPP
encryption
strength
Incoming FTP
FTP receiving
encryption
strength
SMTP receiving
SMTP receiving
encryption
strength
Select the type
of certificate
used.
Common
Name
Organization
Organizational Unit
Locality
Item
Network
Card Setup
Utility
(Mac OS X)
- -
- -
- -
- -
Item
Network
Card Setup
Utility
(Mac OS X)
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Factory
Default
Settings
Disable Specifies whether to use MAC address filtering.
This function is used to control access from the
MAC address. Make sure to make the following
category settings if enabling MAC address
filtering. Unless these settings are made, the
device cannot be accessed via a network.
Authorization Specifies whether to authorize or deny access
from the specified MAC address.
00:00:00: Specifies the MAC address to which filtering is
00:00:00 applied.
00:00:00: Automatically specifies the administrator MAC
00:00:00 address.
Normally only this address can access the device.
All accesses are authorized via proxy servers if
the administrator accesses the server via a proxy
server.
Factory
Default
Settings
Disable Specifies whether to encrypt HTTP/IP communications.
Standard Specifies the encryption strength of HTTP/IPP
communication.
Disable Specifies whether to encrypt receiving via FTP.
Standard Specifies the encryption strength of receiving via
FTP.
Disable Specifies whether to encrypt receiving via SMTP.
Standard Specifies the encryption strength of receiving via
SMTP.
Using the Creates your signed certificate. Further, creates
certificate the CSR to be sent to the authenticator, and
signed by you installs the certificate issued by the authenticator.
(Printer IP The device IP address is specified when your
address) signed certificate is created.
(None) Specifies the formal name of the organization
to which the user belongs using 64 single-byte
characters max.
(None) Specifies the name of the sub-group (store, etc.)
to which the user belongs using 64 single-byte
characters max.
(None) Specifies the region name to which the user
belongs using 128 single-byte characters max.
- 222 -
Explanation
Explanation