Usb Setup - Oki C931 User Manual

Table of setting items in the device setup screen
Hub Link Setting
1
2
Network Factory Defaults
„ USB Setup
3
USB
4
Speed
Soft Reset
Serial Number
5
Offline Receive
Item
Item
Enable
Disable
480Mbps
12Mbps
Enable
Disable
Enable
Disable
Enable
Disable
Auto Sets the connection mode to the hub.
100Base-TX
Full
100Base-TX
Half
10Base-T Full
10Base-T Half
Execute Restores the settings such as network, mail
server, LDAP server, and secure protocol
server, etc., to their default values.
Enables/disables access using a USB interface.
Sets the maximum baud rate using a USB interface.
Enables/disables the software reset command.
Enables/disables the USB serial number.
The USB serial number is used to identify USB
devices connected to a PC.
Sets whether to receive data even if offline or a
recoverable error occurs.
- 300 -
z Shaded areas are factory-set values.
Details
z Shaded areas are factory-set values.
Details