Table of setting items in the device setup screen
Language
Language Initialize
1
Setup
Font Setup
Font Output Mode
Job Cancel
Cancel Key Behavior
Setup
2
3
Inquiry Display
Focus Position
Display Timeout
4
5
Settings
Reset Settings
Save Settings
*1
Restore Settings
*1: Displayed when [Save Settings] is executed on
the control panel.
Change Password
New password
Verify Password
Item
Execute
JIS90
JIS2004
Short
Long
Off
On
Off
Yes
No
60
to
180
to
300
Item
Execute
Execute
Execute
Item
**************** Sets a new password to be entered in the
**************** Sets a new password to be entered in the
Deletes the message files that have been
downloaded.
Sets the font output mode.
Sets the operations when the device [CANCEL]
button is pressed.
Short:
Press and hold for 2s max. to cancel the print job.
Long:
Press and hold for 2 to 5s to cancel the print job.
Off:
Disables the [CANCEL] button.
Sets whether to display the enquiry screen when a
job is canceled.
Sets whether to apply [Yes] or [No] focus for
selection in the job cancellation enquiry screen.
Sets the display timeout value for the enquiry
screen when a job is canceled.
Restores the user menu settings to the factory
settings.
Saves the current menu settings.
Changes the saved menu settings.
[Administrator menu] and [Boot Menu].
[Administrator menu] and [Boot Menu] for which
[New password] has been set.
- 316 -
z Shaded areas are factory-set values.
Details
z Shaded areas are factory-set values.
Details
z Shaded areas are factory-set values.
Details