Logging In As An Administrator - Oki C931 User Manual

Setting the network from the web browser
Logging in as an
administrator
1
Note
z To change the device settings using the web browser, it is
necessary to log in as a device administrator.
1
Click [Administrator Login].
2
3
4
2
Enter "root" in [Username], and the
current password in [Password], and
click [OK].
5
Memo
z The password is the same as for the "Administrator
password" in the control panel.
3
Set the printer information that can be
checked using the network, and click
either [OK] or [SKIP].
Note
z Click [SKIP] to omit the setup.
z Enable the [Do not show this page again] check
box, and click either [OK] or [SKIP] to disable this
display for subsequent logins.
4
The following screen will be displayed.
- 232 -