Color Setup - Oki C931 User Manual

Table of setting items in the device setup screen
Letter O Style
1
Zero Character
Line Pitch
2
White Page Skip
CR Function
Line Length
3
Form Length
TOF Position
4
Left Margin
5
Fit to Letter
Text Height
Continuous Paper Mode
„ Color Setup
Ink Simulation
UCR
CMY 100% Density
CMYK Conversion
*1
Spot Color
*1: Displayed with C941/ES9541dn only.
Item
Enable
Disable
Normal
Slashed
6 LPI
8 LPI
On
Off
CR
CR+LF
80 column
136 column
11 inch
11.7 inch
12 inch
0.0 inch
0.1 inch
~
1.0 inch
0.0 inch
0.1 inch
~
1.0 inch
Enable
Disable
Same
Diff
On
Off
Item
Off
SWOP
ISO Coated
Japan
Low
Medium
High
Enable
Disable
On
Off
White
Clear
Specifies the style that replaces φ (9B)and ¥ (9D)
with φ (ou) and Φ (zero).
Specifies the style of 0 (zero).
SLASHED: SLASH ZERO
Sets line space.
Sets whether ejecting a blank sheet or not.
Sets performance when CR code is received.
Specifies the number of characters per line.
Specifies the length of paper.
Sets the position from the top edge of paper.
Sets the amount to shift the horizontal print start
position to the right.
Sets the printing mode that can fit print data,
equivalent to 11 inches (66 lines), in the LETTER-
size printable area.
Sets height of a character.
Sets to Landscape the edit direction of paper
supported by A3 printer.
Sets the ink simulation. This setting is enabled only
for PS language jobs.
You can select the black plate (black) amount
during color printing.
Setting more black plate economizes on the toner
of the other three colors.
Enables and disables 100% output over the CMY
100% shade values.
You can select the method of total toner amount
control for CMYK data. Select [Off] to disable the
GCR (Gray Component Replacement).
Further, this menu setting is disabled if using the
ink simulation function.
Displays the spot color information.
The setting is enabled after the printer is restarted.
- 312 -
z Shaded areas are factory-set values.
Details
z Shaded areas are factory-set values.
Details