Usb Setup; Print Setup - Oki C332dnw User Manual

ITEM
HUB LINK SETTING
FACTORY DEFAULTS
USB S
ETUP
This menu controls the operation of the printer's USB data interface.
ITEM
USB
SPEED
SOFT RESET
SERIAL NUMBER
OFFLINE RECEIVE
CONNECTED HOST
P S
RINT ETUP
This menu provides adjustment of various print job related functions.
ITEM
PERSONALITY
COPIES
DUPLEX
SETTINGS
AUTO NEGOTIATE
100BASE-TX FULL
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALF
EXECUTE
SETTINGS
ENABLE
DISABLE
480 Mbps
12 Mbps
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
NORMAL
SPECIFIC
SETTINGS
AUTO
EMULATION
PCL
XPS
IBM PPR III XL
EPSON FX
PS3 EMULATION
1
~
999
ON
OFF
Operator panel > 37
EXPLANATION
Sets full or half duplex for communication via a network
hub.
When AUTO NEGOTIATE is set, negotiation is done
automatically.
Reloads the settings present when the unit was setup
by the manufacturer.
EXPLANATION
Sets USB I/F Enable/Disable.
Selects the USB interface speed.
Enables or disables the SOFT RESET command.
Specifies whether to ENABLE or DISABLE a USB serial
number.
The USB serial number is used to identify the USB
device connected to your PC.
Enables or disables this function. When set to Enable,
the interface retains a receive possible state even when
switching to Offline. Interface sends the BUSY signal
only when the receive buffer is full or a service call
occurs.
EXPLANATION
Selects a printer language.
Enter the number of copies of a document to be
printed from 1 to 999.
Switches the Duplex (2 sided) function ON/OFF.