Postscript Menu - Lexmark MX410 series User Manual

Understanding the printer menus
Use
Annotations
Do Not Print
Print

PostScript menu

Use
Print PS Error
On
Off
Lock PS Startup Mode
On
Off
Font Priority
Resident
Flash/Disk
PCL Emul menu
Use
Font Source
Resident
Disk
Download
Flash
All
Font Name
Courier 10
To
Print annotations in a PDF.
Note: Do Not Print is the factory default setting.
To
Print a page containing the PostScript error.
Note: Off is the factory default setting.
Disable the SysStart file.
Note: Off is the factory default setting.
Establish the font search order.
Notes:
•
Resident is the factory default setting.
•
This menu item is available only when a formatted flash memory option
card or printer hard disk is installed and operating properly.
•
Make sure the flash memory option or printer hard disk is not
read/write‑, write‑, or password‑protected.
•
Job Buffer Size must not be set to 100%.
To
Specify the set of fonts used in the Font Name menu.
Notes:
•
Resident is the factory default setting. It shows the factory default set of
fonts downloaded in the RAM.
•
Flash and Disk settings show all fonts resident in that option. Make sure
the flash option is properly formatted and is not read/write‑, or
password‑protected.
•
Download shows all the fonts downloaded in the RAM.
•
All shows all fonts available to any option.
Identify a specific font and where it is stored.
Note: Courier 10 is the factory default setting.
193