Printer Configurations - Lexmark MX410 series User Manual

Learning about the printer
1 Right side 304.8 mm (12 in.)
2 Front 508 mm (20 in.)
3 Left side 203.2 mm (8 in.)
4 Rear 203.2 mm (8 in.)
5 Top 736.6 mm (29 in.)

Printer configurations

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must
use either a printer stand or printer base if you are using multiple input options. If you purchased a
multifunction printer (MFP) that scans, copies, and faxes, then you may need additional furniture. For more
information, see www.lexmark.com/multifunctionprinters.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all
other trays closed until needed.
You can configure your printer by adding an optional 250‑ or 550‑sheet tray. For instructions on installing the optional
tray, see "Installing optional trays" on page 41.
11