Lexmark MX410 series User Manual page 194

Understanding the printer menus
Use
Symbol Set
10U PC‑8
12U PC‑850
PCL Emulation Settings
Point Size
1.00–1008.00
PCL Emulation Settings
Pitch
0.08–100.00
PCL Emulation Settings
Orientation
Portrait
Landscape
PCL Emulation Settings
Lines per Page
1–255
PCL Emulation Settings
A4 Width
198 mm
203 mm
To
Specify the symbol set for each font name.
Notes:
•
10U PC‑8 is the US factory default setting. 12U PC‑850 is the international
factory default setting.
• A symbol set is a set of alphabetical and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text. Only the
supported symbol sets are shown.
Change the point size for scalable typographic fonts.
Notes:
•
12 is the factory default setting.
• Point size refers to the height of the characters in the font. One point
equals approximately 0.014 of an inch. This can be increased or decreased
in 0.25‑point increments.
Specify the font pitch for scalable monospaced fonts.
Notes:
•
10 is the factory default setting.
• Pitch refers to the number of fixed‑space characters per inch (cpi). This
can be increased or decreased in 0.01‑cpi increments.
•
For non‑scalable monospaced fonts, the pitch appears on the display but
cannot be changed.
Specify the orientation of text and graphics on a page.
Notes:
•
Portrait is the factory default setting. It prints text and graphics parallel to
the short edge of the page.
•
Landscape prints text and graphics parallel to the long edge of the page.
Specify the number of lines that print on each page.
Notes:
•
60 is the US factory default setting. 64 is the international default setting.
•
The printer sets the amount of space between each line based on the
Lines per Page, Paper Size, and Orientation settings. Select the paper size
and orientation before setting Lines per Page.
Set the printer to print on A4‑size paper.
Notes:
•
198 mm is the factory default setting.
•
The 203‑mm setting sets the width of the page to allow the printing of
eighty 10‑pitch characters.
194