Ftp Settings Menu - Lexmark MX410 series User Manual

Understanding the printer menus
Use
Adjust ADF Skew
Auto
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Use cc:/bcc:
Off
On

FTP Settings menu

Use
Format
PDF (.pdf)
TIFF (.tif)
JPEG (.jpg)
XPS (.xps)
RTF (.rtf)
TXT (.txt)
PDF Settings
PDF Version
1.2–1.7
A–1a
A–1b
PDF Compression
Normal
High
Secure PDF
Off
On
Searchable PDF
Off
On
To
Correct the slight skew in the scanned image.
Notes:
•
Auto is the factory default setting.
•
This menu item appears only in some printer models.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Specify warm or cool outputs. Cool values generate a bluer output than the default
while warm values generate a redder output than the default.
Note: 0 is the factory default setting.
Enable the use of the cc and bcc fields.
Note: Off is the factory default setting.
To
Specify the file format.
Note: PDF (.pdf) is the factory default setting.
Configure the PDF settings.
Notes:
•
1.5 is the factory default setting for PDF Version.
•
Normal is the factory default setting for PDF Compression. This setting
appears only when a formatted, working hard disk is installed.
•
Off is the factory default setting for Secure PDF and Searchable PDF. Secure
PDF requires you to enter your password twice.
176