What You Need To Know; General Screen - ZyXEL Communications LTE3301 Series User Manual

Lte indoor gateway
Hide thumbs Also See for LTE3301 Series:
Table of Contents

Advertisement

17.3 What You Need To Know

The sum of the bandwidth allotments that apply to the WAN interface (LAN to WAN, WLAN to WAN)
must be less than or equal to the upstream bandwidth that you configure in the Bandwidth
Management > General screen
The sum of the bandwidth allotments that apply to the LAN interface (WAN to LAN, WAN to WLAN)
must be less than or equal to the downstream bandwidth that you configure in the Bandwidth
Management > General screen

17.4 General Screen

Use this screen to have the LTE3301 apply bandwidth management.
Click Management > Bandwidth MGMT to open the bandwidth management General screen.
Figure 75 Management > Bandwidth Management > General
The following table describes the labels in this screen.
Table 51 Management > Bandwidth Management > General
LABEL
Enable Bandwidth
Management
Bandwidth of
Upstream
Bandwidth of
Downstream
Flexible Bandwidth
Management
Apply
Cancel
Chapter 17 Bandwidth Management
(Section 17.5 on page
Section 17.5 on page
DESCRIPTION
This field allows you to have LTE3301 apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule priority
over traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or minimum
amounts of bandwidth that can be used by traffic that matches a bandwidth rule.
Specify the total amount of bandwidth that you want to dedicate to uplink traffic. The
recommendation is to set this to match the actual upstream data rate.
This is traffic from LAN/WLAN to WAN.
Specify the total amount of bandwidth that you want to dedicate to downlink traffic. The
recommendation is to set this to match the actual downstream data rate.
This is traffic from WAN to LAN/WLAN.
Select Enable to use up to 100% of the configured bandwidth. If you select Disable,
you can only use up to 33% of the configured bandwidth.
Click Apply to save your customized settings.
Click Cancel to begin configuring this screen afresh.
LTE3301 Series User's Guide
115
116).
116.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents