Related Manuals for ZyXEL Communications LTE5121
Summary of Contents for ZyXEL Communications LTE5121
- Page 1 LTE5121 LTE IAD Version 1.00 Edition 1, 07/2013 Quick Start Guide Default Login Details LAN IP Address http://192.168.1.1 User Name admin Password 1234 www.zyxel.com Copyright © 2013 ZyXEL Communications Corporation...
-
Page 2: Front Panel Leds
Device Panels Front Panel LEDs POWER LTE/3G INTERNET WLAN PHONE 1, 2 SIGNAL STRENGTH ETHERNET 1‐4 Side and Back Panels ON/OFF WLAN RESET PHONE SIM ETHERNET BUTTON BUTTON ON/OFF PORT PORT 1,2 PORT 1‐4 SLOT BUTTON POWER SOCKET BUTTON... - Page 3 • WEB BROWSER: Internet Explorer 6.0 and later versions, with JavaScript enabled, or Mozilla Firefox 3 and later versions, or Safari 2.0 and later versions. The browser will be used to access the Internet and/or access the LTE5121’s Web Configurator.
-
Page 4: Hardware Connections
Use a USB cable (not provided) if needed. 3. ETHERNET: For a wired connection to the LTE5121, use an Ethernet cable to connect a computer to one of these ports for initial configuration and/or Internet access. - Page 5 PHONE 1 or PHONE 2 port. If you only have one telephone, use PHONE 1. 5. POWER: Use the power adaptor provided with your LTE5121 to connect an appropriate power source to this socket. 6. POWER: Push the side-panel POWER button to the ON position.
- Page 6 • The PHONE lights stay on when your SIP account is registered and blink if the receiver is off the hook. If the POWER light does not turn on during start up, turn the LTE5121 off, check the connections, wait a few seconds and then turn it back on. If the problem...
-
Page 7: Set Up A Wireless Connection
WPA2-PSK: 7WC3R7TVKWK3R 1. Right-click the wireless adapter icon in the bottom right of your computer monitor. Click View Available Wireless Networks. 2. Select the LTE5121’s SSID name and click Connect (A). The SSID “SecureWirelessNetwork” is given here as an example. - Page 8 5. You should now be securely connected wirelessly to the LTE5121. If you cannot connect wirelessly to the LTE5121, check that you selected the correct SSID and entered the correct security key. Make sure the LTE5121’s physical WLAN ON/OFF button is set to ON and the WLAN LED is on.
-
Page 9: Connect To The Internet
Home page then all you need to do is enter the login information that you were given and follow the on- screen instructions. The LTE5121 should then automatically update itself with the settings that you need to connect to the Internet. - Page 10 The APN identifies the LTE network to which your LTE Modem connects. 4. Change the APN, IP address and DNS server settings if necessary. Click Apply. 5. If a PIN code is required, click Network Setting > Broadband > SIM. Enter it and click Apply.
- Page 11 6. Wait for the INTERNET light to turn on and then try browsing to a website. • For more information see the Broadband section in the User’s Guide. • To configure wireless access, go to Network Setting > Wireless. • To set up WPS using the Web Configurator, go to Network Setting >...