Multi To 1 Vlan Setting - KTI Networks KFS-2621 User Manual

4.14 Multi to 1 VLAN Setting

Configuration
Joint port
[Apply]
[LoadDefault]
Remark:
1. This mode is a special port-based VLAN application. Each of all ports combing the joint port becomes an
individual 2-port VLAN group logically. The joint port is the common port for all groups.
2. Each of all ports except the joint port can only forward packets to the joint port.
3. The point port can forward packets to all ports except itself.
4. All ports can't talk to each other except the joint port.
Note:
To click [Apply] will change VLAN mode to port-based VLAN and configure according settings. The previous
egress rule settings are set to defaults.
Description
Select a port as the joint port
Click to apply the configuration change
Click to use default setting values
-42-