Qos Priority Mode - KTI Networks KFS-2621 User Manual

4.16 QoS Priority Mode

Configuration
Mode
Low weight
High weight
[Apply]
Remark:
1. The switch implements two levels of priority queues for port egress operation.
2. Each packet is classified as high priority or low priority based on CoS classification configuration.
3. Weight value 0 represents "8" actually.
Description
QoS service policy for egress operation on a port
First-In-First-Out – egress by packet arrival time, no priority difference
All-High-before-Low – all high priority packets transmitted first
Weight-Round-Robin – egress based on [High / Low] weight ratio
Weight of low priority in weight ratio
0 ~ 7 (weight 0 = weight 8)
Weight of high priority in weight ratio
0 ~ 7 (weight 0 = weight 8)
Click to apply the configuration change
-44-