Lacp - KTI Networks KGS-510F-C Installation Manual

4.7 LACP

Configuration
Port
Protocol Enabled
Key Value
[Apply]
[Refresh]
Notes:
1. This configuration is used to configure LACP aggregate groups.
2. The ports with same key value are in same LACP aggregate group.
3. The ports with Auto key are in same LACP aggregate group.
Description
Port number
Enable LACP support for the port
An integer value assigned to the port that determines which ports are
aggregated into an LACP link aggregate. Set same value to the ports in
same LACP link aggregate. Value: 1 ~ 255.
Auto - key value is assigned by the system
Click to apply the configuration change
Click to refresh current configuration
-41-