Surround Panel Installation - Travis Industries 1750 Fireplace Insert Owner's Manual

12 Fireplace Insert Installation

Surround Panel Installation

Rectangular Panels:
SURROUND PANEL SIZE
8"
10"
12"
Installation Instructions
1. With the insert 12" from the fireplace, install the side surround panels (see the directions below).
NOTE: These flanges on the
side panels insert into the
convection channel.
1750
Attach the side panels using the nuts and bolts
included with the stove.
REVERE
Attach the side panels using the studs on the side convection fronts and the nuts included with the stove.
2. Adjust the position of the side panels so they are: 1) flush with the bottom of the insert; 2) both the
same distance back from the front of the insert; 3) perpendicular to the floor (use the top panel, if
necessary, to judge alignment). Tighten the screws that hold the side panels in place.
© Travis Industries
(for qualified installers only)
HEIGHT WIDTH
27 5/8" 40 3/8 "
29 5/8" 44 3/8 "
31 5/8" 48 3/8 "
Side Convection Front
(Revere Only)
100-01234 4141211