Using The Remote Control Unit - Denon AVR-1905 Operating Instructions Manual

Denon av surround receiver operating instructions
Hide thumbs Also See for AVR-1905:
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
Remote control unit
• For details on the functions of these parts, refer to the pages given in parentheses ( ).
LED (indicator) .......................(17, 19)
SURROUND
buttons.............................(20, 23, 29)
Input source selector buttons
...............................................(17~20)
System buttons .....................(17, 18)
SYSTEM SETUP/
SETUP button ........................(11, 18)
Cursor buttons .................(11, 18, 25)
ON SCREEN/
DISPLAY button .....................(18, 27)
TEST TONE button ......................(23)
VIDEO SELECT button.................(22)
INPUT MODE selector
buttons...................................(20, 21)
10
7

USING THE REMOTE CONTROL UNIT

Following the procedure outlined below, insert the batteries before using the remote control unit.
Remote control signal
Range of operation of the remote control unit
transmitter ...................................(10)
Power buttons.................(12, 17~19)
Approx. 7 m
Tuner system/System
buttons.............................(17, 18, 31)
Inserting the batteries
Mode select
q Press as shown by the arrow
switches ................................(17~19)
and slide off.
Master volume control
buttons.........................................(20)
MUTING button ...........................(22)
SURROUND PARAMETER
button.....................................(18, 24)
NOTES:
• Use only R6P/AA batteries for replacement.
CH SELECT (channel select)/
• Be sure the polarities are correct. (See the illustration inside the battery compartment.)
ENTER button............(11, 18, 24, 25)
• Remove the batteries if the remote control transmitter will not be used for an extended period of time.
• If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact
SURROUND BACK/
with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
RETURN button .....................(18, 26)
• Have replacement batteries on hand so that the old batteries can be replaced as quickly as possible when the
time comes.
SPEAKER button..........................(19)
• Even if less than a year has passed, replace the batteries with new ones if the set does not operate even when
the remote control unit is operated nearby the set. (The included battery is only for verifying operation. Replace
it with a new battery as soon as possible.)
DIMMER button...........................(22)
Point the remote control unit at the remote control
sensor as shown on the diagram at the left.
NOTES:
• The remote control unit can be used from a straight
distance of approximately 7 meters, but this
distance will shorten or operation will become
difficult if there are obstacles between the remote
control unit and the remote control sensor, if the
remote control sensor is exposed to direct sunlight
30°
or other strong light, or if operated from an angle.
30°
• Neon signs or other devices emitting pulse-type
noise nearby may result in malfunction, so keep the
set as far away from such devices as possible.
w Insert the R6P/AA batteries properly,
e Close the lid.
as shown on the diagram.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents