Denon AVR-1905 Operating Instructions Manual page 19

Punch Through
• "Punch Through" is a function allowing you to operate the PLAY, STOP, MANUAL SEARCH and AUTO SEARCH
buttons on the CD, TAPE, CDR/MD, DVD/VDP or VCR components when in the DBS/CABLE or TV mode. By
default, nothing is set.
1
Set mode switch 1 to "VIDEO".
2
Set mode switch 2 to the component to be
registered (DBS/CABLE or TV).
3
Press the DVD/VDP POWER button and the TV
POWER button at the same time.
• Indicator flash.
4
Input the number of the
1 2 3
component you want to
4 5 6
set. (See Table 1)
7 8 9
0
Table 1
No.
CD 1
TAPE 2
CDR/MD 3
DVD/VDP 4
VCR 5
No setting 0
10
Before operating
3
3
4
1 2
OPERATION
2 1 3
2
3
ENGLISH
Preparations:
Check that all connections are proper.
1
Press the power switch (button).
ON OFF
(Main unit)
• ON
¢
The power turns on and indicator is light.
Set the power switch to this position to turn
the power on and off from the included
remote control unit.
• £ OFF
The power turns off and power indicator is
off.
In this position, the power cannot be turned
on and off from the remote control unit.
2
Turn on the power.
Press the Power ON/STANDBY switch (button).
(Main unit) (Remote control unit)
When pressed, the power turns on and the
display lights. The sound is muted for several
seconds, after which the unit operates normally.
When pressed again, the power turns off, the
standby mode is set and the display turns off.
3
Select the front speakers.
Press the SPEAKER A or B button to turn the
speaker on.
(Main unit) (Remote control unit)
• The front speaker A, B setting can be also be
changed with the SPEAKER button on the
remote control unit.
19