Denon AVR-1905 Operating Instructions Manual page 26

ENGLISH
7
Set the various surround parameters.
SELECT
(Main unit) (Remote control unit)
8
When the surround parameters are set using
the buttons on the main unit, stop operating
buttons after completing the settings. The
settings are automatically finalized and the
normal display reappears after several seconds.
Surround parameters q
II II
Pro Logic x and Pro Logic Mode:
• The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround.
• The Music mode is recommended as the standard mode for auto sound music systems (no video), and is
optional for A/V systems.
• The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source
contents is not of optimum quality.
• The Game mode for playing games. The game mode can only be used with 2-channel audio sources.
Select one of the modes ("Cinema", "Music", "Pro Logic"or "Game").
Panorama Control:
This mode extends the front stereo image to include the surround speakers for an exciting "wraparound"
effect with side wall imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either towards the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only from the center speaker; only from the left/right
speakers as a phantom image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
DTS NEO:6 Mode:
• Cinema
This mode is optimum for playing movies.
performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources.
This mode is effective for playing sources recorded in conventional surround formats as well, because the
in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the
surround (SL, SR and SB channels).
• Music
This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder
and are played directly so there is no loss of sound quality, and the effect of the surround signals output
from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound
field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC
mode has been added.
26
9
Press the ENTER button to finish surround
parameter mode.
(Remote control unit)
NOTE:
• When making parameter settings, the display
will return to the regular condition several
seconds after the last button was pressed and
the setting will be completed.
Decoding is performed with emphasis on separation
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
Playback with a digital input
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 15).
Example: DVD
FUNCTION
(Main unit) (Remote control unit)
w Set the input mode to "AUTO" or DTS.
INPUT MODE
(Main unit) (Remote control unit)
2
Select the STANDARD (Dolby/DTS Surround)
mode.
STANDARD
(Main unit) (Remote control unit)
When performing this operation from the main
unit's panel, press the SURROUND MODE
button, then turn the SELECT knob and select
II
Dolby Pro Logic x or DTS NEO:6.
SURROUND
MODE SELECT
(Main unit) (Remote control unit)
3
Operate the SURROUND BACK button to
switch Surround Back CH ON/OFF.
SURROUND
BACK
SURROUND
BACK
(Main unit) (Remote control unit)
• Lights when the SURROUND BACK button is
on.
1 1 4 3
3 2 2 5, 6
2
1
6
5, 6
8
7 7
3
6
1
4
Play a program source with the
mark.
Light
• The Dolby Digital indicator lights
DIGITAL
Light when playing Dolby Digital
sources.
• The DTS indicator lights when
playing DTS sources.
Light
2, 7
,