Denon AVR-1905 Operating Instructions Manual page 7

Connecting the video component equipped with Color Difference
(Component - Y, P /C , P /C ) Video jacks
R R B B
• When making connections, also refer to the operating instructions of the other components.
• The signals input to the color difference (component) video jacks are not output from the VIDEO output jack
(yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video
input jacks are not output to the color difference (component) video jacks.
• Some video sources with component video outputs are labeled Y, C
terms all refer to component video color difference output.
Connecting a DVD player
DVD IN jacks
• Connect the DVD player's color difference (component) video output jacks
DVD player
(COMPONENT VIDEO OUTPUT) to the COMPONENT DVD/VDP IN jack using
COMPONENT
75 Ω/ohms coaxial video pin-plug cords.
VIDEO OUT
B
Y C B C R • In the same way, another video source with component video outputs such as
a TV/DBS tuner, etc., can be connected to the TV/DBS color difference
(component) video jacks.
Monitor TV Connecting a monitor TV
MONITOR OUT jack
• Connect the TV's color difference (component) video input jacks (COMPONENT
COMPONENT
VIDEO IN
VIDEO INPUT) to the COMPONENT MONITOR OUT jack using 75 Ω/ohms
Y C C
B R
coaxial video pin-plug cords.
• The color difference input jacks may be indicated differently on some TVs,
monitors or video components ("C
and Y", etc.). For details, carefully read the operating instructions included
with the TV or other component.
• Video Conversion signals
Signal input to the AVR-1905
Video signal output to VIDEO
MONITOR OUT jack (yellow)
Video signal input jack C
C
S-Video signal input jack
(Down-conversion)
Color difference (component)
E
Video signal input jack
, C , or Y, P , P , or Y, R-Y, B-Y. These
B R B R
, C and Y", "R-Y, B-Y and Y", "P
R B
Monitor Output jacks
Video signal output to color
Video signal output to S-Video
difference (component) Video
MONITOR OUT jack
MONITOR OUT jack
C
E
(Up-conversion)
C E
E C
(C : Video signal output, E : Video signal not output)
Connecting the antenna terminals
DIRECTION OF
BROADCASTING
STATION
FM INDOOR
FM
ANTENNA
ANTENNA
(An accessory)
75 Ω/ohms
COAXIAL
CABLE
AM LOOP
ANTENNA
(An Accessory)
, P
R B
AM loop antenna assembly
Connect to the AM
antenna terminals.
1 2
3
Remove the vinyl tie
Bend in the reverse
and take out the
direction.
connection line.
4
a. With the
antenna on top
any stable
surface.
Mount
b. With the antenna
attached to a
wall.
Installation hole Mount on wall, etc.
ENGLISH
AM OUTDOOR
ANTENNA
GROUND
An F-type FM antenna cable plug can be connected directly.
Connection of AM antennas
1. Push the lever. 2. Insert the 3. Return the
conductor. lever.
NOTES:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
• Make sure AM loop antenna lead terminals do
not touch metal parts of the panel.
7