Setting Up The System - Denon AVR-1905 Operating Instructions Manual

8

SETTING UP THE SYSTEM

• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see
pages 5 to 9), make the various settings described below on the monitor screen using the AVR-1905's on-
screen display function.
These settings are required to set up the listening room's AV system centered around the AVR-1905.
Use the following buttons to set up the system
1
Set the slide switch to "AUDIO".
2
Use the following buttons to set up the system:
SYSTEM SETUP button
Press this to display the system setup on the display.
CURSOR buttons (•, ª,
Press this change what appears on the display.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
• System setup items and default values (set upon shipment from the factory)
System setup
Input the combination of speakers in your system
and their corresponding sizes (SMALL for regular
Speaker speakers, LARGE for full-size, full-range) to
Configuration automatically set the composition of the signals
output from the speakers and the frequency
response.
This parameter is for optimizing the timing with
which the audio signals are produced from the
Delay Time
speakers and subwoofer according to the listening
position.
Subwoofer This selects the subwoofer speaker for playing deep
mode bass signals.
Set the frequency (Hz) below which the bass sound
Crossover
of the various speakers is to be output from the
Frequency
subwoofer.
This adjusts the volume of the signals output from
Test Tone the speakers and subwoofer for the different
channels in order to obtain optimum effects.
Input
source
Digital In This assigns the digital input jacks for
Assignment the different input sources.
Digital
Inputs
, )
0 1
Default settings
Center Surround Surround
Front Sp. Subwoofer
Sp. Sp. Back Sp.
Small /
Large Small Small
2 spkrs
Front Front Surround Surround Surround Surround
Center
L R L R Back L Back R
3.6 m 3.6 m 3.6 m 3.0 m 3.0 m 3.0 m 3.0 m
Subwoofer mode = LFE (Normal)
80 Hz
Front Front Surround Surround Surround Surround
Center
L R L R Back L Back R
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
CD DVD/VDP TV/DBS
COAXIAL OPTICAL 1 OPTICAL 2
System setup
Auto Surround
Auto surround mode function setting.
Mode
Ext. In SW
Set the Ext. In Subwoofer channel playback level.
Level
This sets whether or not to display the on-screen
display that appears on the monitor screen when
On Screen
the controls on the remote control unit or main unit
Display
are operated.
A setting to prevent flickering.
Auto Tuner FM stations are received automatically and stored
Presets in the memory.
NOTES:
• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback
of a video component. For example, if the TV monitor is connected to both the AVR-1905's S-Video and
video monitor output jacks and signals are input to the AVR-1905 from a video source (VDP, etc.) connected
to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-
Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a
cord to the S-VIDEO MONITOR OUT jack. (For details, see page 16.)
• The AVR-1905's on-screen display function is designed for use with high resolution monitor TVs, so it may
be difficult to read small characters on TVs with small screens or low resolutions.
• The setup menu is not displayed when headphone are being used.
2 Speaker system layout
Basic system layout
• The following is an example of the basic layout for a system consisting of eight speaker systems and a
television monitor:
Subwoofer
Yes
Sub-
woofer
3.6 m
Sub-
woofer
0 dB
Front speaker systems
Set these at the sides of the TV or
screen with their front surfaces as flush
with the front of the screen as possible.
ENGLISH
Default settings
Auto Surround Mode = ON
Ext. In SW Level = +15 dB
On Screen Display = ON / Mode 1
A1 ~ A8 87.5/89.1/98.1/108.0/90.1/90.1/90.1/90.1 MHz
B1 ~ B8 522/603/999/1404/1611 kHz, 90.1/90.1/90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
Center speaker system
Surround back speaker system
Surround speaker systems
11