Accessories; Options / Accessories - Lincoln Electric RED-D-ARC FX450 Operator's Manual

C-1

OPTIONS / ACCESSORIES

General Options
K2149-1 Work Lead Package.
K1842-10 10ft. Weld Power Cable (Lug to Lug).
Inverter and Wire Feeder Cart Rear-wheeled cart
includes front casters and no-lift gas bottle platform.
Convenient handles allow for easy cable storage while
full length side trays store parts and tools. Shipped
fully assembled. Small footprint fits through 30" (762
mm) door.
Order K2945-1.
Fume Extracting Systems
Accessory Kit For stick weld-
ing. Includes 35 ft. (10.7 m) 2/0
electrode cable with lug, 30 ft.
(9.1 m) 2/0 work cable with lugs,
headshield, filter plate, cover
plate, work clamp and electrode
holder. 400 amp capacity. Order
K704
Remote Output Control
Consists of a control box with
choice of two cable lengths.
Permits remote adjustment of out-
put.
Order K857 for 25 ft. (7.6 m)
Order K857-1 for 100 ft. (30 m)
TIG Options
Pro-Torch™ TIG Torches – PTA-
9, PTA-17, PTA-26 – 2 piece
power cord.

ACCESSORIES

Foot Amptrol®
Provides 25 ft. (7.6 m) of remote
current control for TIG welding.
(6-pin plug connection).
Order K870
Hand Amptrol® - Provides 25 ft.
(7.6 m) of remote current control
for TIG welding. (6-pin plug con-
nection).
Order K963-3
Arc Start Switch - May be used
in place of the Foot or Hand
Amptrol®. Comes with a 25 ft.
(7.6m) cable. Attaches to the TIG
torch for convenient finger control
to start and stop the weld cycle at
the current set on the machine.
Order K814
FX450 (RED-D-ARC)
C-1