Accessories; Drive Rolls Kits; K363P Readi-Reel Adapter; Dual Cylinder Mounting Kit - Lincoln Electric 11519 Service Manual

C-2
DRIVE ROLL KITS
Refer to Table C.1 for various drive roll kits that are
available for the Power MIG® 255XT. All items in Bold
are supplied standard with the Power MIG® 255XT.
TABLE C.1
Electrode Type Wire Size
Solid Steel .023"-.030" (0.6-0.8 mm)
.035" (0.9 mm)
(Includes
.045" (1.2 mm)
Stainless
.035-.045 (0.9-1.2mm)
Steel)
.040 (1.01)
.035" (0.9 mm)
Cored
.045" (1.2 mm)
Aluminum 3/64" (1.2 mm)
.035" (0.9 mm)
*For use with optional Push Pull Gun.
3/64" (1.2 mm) ALUMINUM FEED-
ING KIT (K1703-1)
This kit helps push feeding aluminum through stan-
dard machine feeder and gun. It provides gun and wire
drive conversion parts to weld with 3/64" (1.2 mm) alu-
minum wire. 5356 alloy aluminum wire is recommend-
ed for best push feeding performance.
Kit includes drive rolls and wire guide plate for the wire
drive, liner and two contact tips for the gun, along with
installation instructions.
K2378-1 Canvas Cover
K468 Spindle Adapter - for 8" (203.2mm) O.D. spool.
K363P READI-REEL™ ADAPTER
The K363P Readi-Reel Adapter mounts to the 2"
spindle. It is needed to mount the 22-30 lb. Readi-
Reels.

DUAL CYLINDER MOUNTING KIT

(K1702-1)
Permits stable side-by-side mounting of two full
size (9" dia. x 5' high) gas cylinders with "no lift"
loading. Simple installation and easy instructions
provided. Includes upper and lower cylinder sup-
ports, wheel axles and mounting hardware.

ACCESSORIES

ALTERNATIVE MAGNUM GMAW
GUN AND CABLE ASSEMBLIES
The following Magnum 250L gun and cable assemblies
are separately available for use with the Power MIG®
255XT. Each is rated 200 amps 60% duty cycle (or 250
amps 40% duty) and is equipped with the integrated
Drive Roll Kit
connector, twist-lock trigger connector, fixed nozzle
and insulator, and includes a liner, diffuser, and contact
KP1696-030S
tips for the wire sizes specified:
KP1696-035S
KP1696-045S
KP1696-1
Length
KP1696-2
12' (3.6 m)
KP1697-035C
15' (4.5 m)
KP1697-045C
KP1695-3/64A
Optional liners for different wire diameters are sold
1
KP1695-.035A*
separately, See Table D.1.

MAGNUM GUN CONNECTION KIT

(Optional K466-6)
Using the optional K466-6 Magnum Connection kit for
the Power MIG® permits use of standard Magnum
200, 300 or 400 gun and cable assemblies.
Power MIG® 255XT
English Wire Metric Wire
Part No. Size 1
K533-7 .035 – .045" 0.9 – 1.2 mm
K533-3
C-2
Size